SEALANT
BARiT SEALS are perfect for accentuating the loft-like character of a mineral subfloor. Polished screed is transformed into genuine design floors through the transparent BARiT SEALS.
Our BARiT SEALS are used to create design floors with a transparent or coloured appearance.
Thus, it is protected against the ingress of contaminants and dust collection caused by abrasion is prevented. Similarly, a sealed floor is water-resistant and can be cleaned and maintained more easily. A coloured coating creates a lively habitat; a transparent order creates a purist concrete look. The colour range is supplemented by various degrees of gloss.
Quick Info
- seamless
- dust binding
- mechanically and chemically resistant
- low abrasion
- easy to clean
- low emissions according to AgBB
- declared according to DGNB and LEED
Optic
BARiT SEALS can be applied transparently or pigmented, in satin or matte, depending on the system used for application. Different degrees of gloss are also possible: Matte, satin, glossy.
Samples
Properties
Type: EXW, pigmented or transparent
The pigmented EXW-Sealant is a two-component system based on a colour pigmented, water-dilutable, epoxy resin.
Based on "Building green" this surface coating has achieved 7.5 out of a possible 10 points for LEED and DGNB. It is extremely low emission, solvent free and therefore emits very minimal odor during application. Full overage with the sealant is achieved by repeated applications. After 2-3 coats, the layer's thickness can be measured at up to 0.5 mm.
Type: D1-55
BARiT Sealant - Type: D1-55, is a transparent, high-gloss, two-component system based on polyurethane resin, which is characterized by good light resistance as well as chemical resistance.
Type: DW11
BARiT Sealant - Type: DW11, is a transparent or pigmented, matte, two-component system based on polyurethane resin, which is characterized by good light resistance as well as chemical resistance.
BARiT Sealants are water, oil and petrol resistant, as well as resistant to a variety of alkalis, diluted acids and salt solutions.
For high temperature exposure, BARiT Sealants can handle temperatures between 95° and 150 °C temporarily.
Datasheet
Curing time at 20°C DW11:
|
|
Working under conditions of EXW:
|
|
Working under conditions of DW11:
|
|
Curing time at 20°C D1-55:
|
|
Working under conditions of D1-55:
|
|
Curing time at 20°C EXW:
|
|
| TYPE | EXW | D1-55 | DW11 |
|---|---|---|---|
| Binding agent | 2-K-EP-resin, emulsified water | 2-K-PUR-resin, in organ. solvents | 2-K-PUR-resin, dispersed water |
| Consumption/m² | 100-150 g / process | 70-100 g / process | 70-100 g / process |
| Colour shade | colourless / pigmented | colourless / pigmented | colourless / pigmented |
| Grade of gloss | silk gloss | high gloss | mat / silk mat |
| Bending tensile strength DIN 1164** | - | - | - |
| Compression strength DIN 1164** | - | - | - |
| Adhesive pull strength DIN EN 24624 | > 1 N/mm² | > 1 N/mm² | > 1 N/mm² |
| Light-fastness | not UV resistant | conditionally resisting to UV | conditionally resisting to UV |
| DGNB / LEED | declaration 7,5 Point | - | declaration 7,5 Point |
| VOC Emission | Meets the requirements of AgBB | Meets the requirements of AgBB | Meets the requirements of AgBB |
| Light-Temperature resistant | 95 °C temporarily / 70 °C consistently | 150 °C temporarily / 120 °C consistently | 150 °C temporarily / 120 °C consistently |
| Chemical resistance | to resistance list and self test | to resistance list and self test | to resistance list and self test |
| Cleaning | BARiT Cleaner* | BARiT Cleaner* | BARiT Cleaner* |
Any questions regarding
our BARIT Designer Floors?
Just call us or send us an email.
+49 711 939291-0 info@barit.deAs an alternative you can use our contact form to get in touch with us:
go to our contact form