Industrial Floors ATEX-COATING POWER/ELASTIC
The conductive BARiT-ATEX-COATING consist of two-components systems based on solvent-free epoxy and/or polyurethane resins packed with mineral fillers and inorganic pigments. Layers of 1.5 or 2 mm are to be applied.
Quick Info
- conductiv to DIN EN 1081 between 10⁴ Ω and 10⁶ Ω
- jointless
- in mat surface antiskid to BGR 181 R9
- mechanical stability
- chemical resistance
- decontaminatable
- almost no abrasion
- easy cleaning and disinfection
Optic
The electrically conductive BARiT COATING - Type: ATEX-POWER and Type: ATEX-ELASTIC can be installed with a matte or gloss finish according to the BARiT colour chart. Specialized colours are available for areas over 500m² on request.
Samples
Properties
BARiT COATING - Type: ATEX-POWER, is a two-component system based on a solvent-free epoxy resin, enriched with mineral fillers and inorganic pigments. Measured according to DIN EN 1081, the discharge resistance lies between 10⁴ Ω and 10⁶ Ω.
BARiT COATING - Type: ATEX-ELASTIC, is a flexible two-component system based on a solvent-free polyurethane resin, enriched with mineral fillers and inorganic pigments. Measured according to DIN EN 1081, the discharge resistance lies between 10⁴ Ω and 10⁶ Ω.
BARiT-ATEX-COATING - Type: ATEX-POWER and Type: ATEX-ELASTIC are resistant to a variety of alkalis, diluted acids, salt solutions, mineral pils, as well as lubricants and fuels. The flooring's installed thickness is 1.5 mm - 2.5 mm. A matte finish allows a non-slipping movement.
The seamless surface ensures hygienic protection as well as a sterile environment and allows easy cleaning. For this purpose we offer BARiT Cleaner, which is specifically designed to clean and care for our products.
Datasheet| Fillers | inorganic/inert |
| Solid matters | 99 % |
| Flash point | > 110 °C / > 100 °C |
| Consumption/m² | ca. 2,1 kg/mm / ca. 2,1 kg/mm |
| Grade of gloss | gloss or mat with finish |
| Colour shade | BARiT card of colours |
| Fire behaviour DIN EN 13501-1 | Bfl-s1, hardly inflammable |
| Bending tensile strength DIN 1164** | > 10 N/mm² |
| Compressing strength DIN 1164** | > 40 N/mm² |
| Ground resistance DIN EN 1081 | 10⁴ – 10⁶ Ω / 10⁴ – 10⁶ Ω |
| Adhesive pull strength DIN EN 24624 | > 1,0 N/mm² |
| Light-fastness | conditionally resisting to UV |
| Temperature resistance | -20 °C to +70 °C |
| Chemical resistance | to resistance list and self test |
Working under conditions of:
|
|
Curing time at 20°C:
|
|
| Binding agent | 2-K-EP-resin / 2-K-PUR-resin |
| Cleaning | BARiT Cleaner* |
Any questions regarding
our BARiT Industrial Floors?
Just call us or send us an email.
+49 711 939291-0 info@barit.deAs an alternative you can use our contact form to get in touch with us:
go to our contact form