Barit Industrial Floors — BARiT® Industrial Floors

Above all, an industrial floor must be able to withstand the highest loads - our jointless synthetic resin floor coatings are made for this.

ELASTIC B 65

The elastifying BARiT COATING Type ELASTIC B65 consists of a two-components system based on solvent-free polyurethane resin packed with mineral fillers and inorganic pigments. ELASTIC B65 is to be applied in layers of 2-3 mm thickness.

Quick Info

bridging over cracks
jointless
antiskid with mat surface to BGR 181 R9
mechanical and chemical resistance
almost no abrasion
Fire classification Cfl-s1
low emissions according to AgBB
easy cleaning and disinfection

Optic

BARiT ELASTIC B 65 can be installed with a matte of satin finish based on a selection from the BARiT colour chart.

Industrial flooring does not always have to look neutral and sober. Pavement markers may be useful as indicators for escape routes, restricted and/or loading zones.

Specialized colours are available for areas over 500m² on request.

Samples

Properties

BARiT ELASTIC B 65 is a two-component system based on a solvent and plasticizer free, polyurethane resin, enriched with mineral fillers and inorganic pigments. Due to its elasticity, cracks with a width up to 1.0 mm can be bridged in a subflooring made of concrete or other material.

The synthesis of professional laying technology and quality materials ensures a coating with low abrasion, which is equipped with good mechanical and chemical resistance. The ELASTIC B 65 is resistant to a variety of alkalis, diluted acids, salt solutions, mineral oils, as well as lubricants and fuels.

This flooring's installed thickness is 1.5 mm - 2.5 mm. For temperature exposure, this flooring can handle 120 °C temporarily, 40 °C consistently.

By installing a special rubber layer, ELASTIC B65 can be turned into a SOFTSOUND Flooring. To reduce the noise level during production and to reduce the strain and tiredness of standing in assembly activities, ELASTIC B65 SOFTSOUN offers exceptional ergonomic advantages. Both, the smooth as well as the non-slipping surfaces, are easy to clean and disinfect.

Datasheet

Flash point	> 100 °C
Consumption/m2	1,4 kg/mm
Colour shade	BARiT card of colours
Fire behaviour DIN EN 13501-1	Cfl-s1, hardly inflammable
Bending tensile strength DIN 1164**	elastic
Grade of gloss	gloss/silk gloss/mat
Compression strength DIN 1164**	elastic
Adhesive pull strength DIN EN 24624	> 1,0 N/mm²
Light-fastness	with finish conditionally resisting to UV
DGNB / LEED	product declaration 7,5 Point
VOC Emission	Meets the requirements of AgBB
Anti-slip Class DIN 51130	R9, R11, R12
Temperature resistance	120 °C temporarily / 40 °C consistently
Chemical resistance	to resistance list and self test
Working under conditions of: ground temperature min. ground temperature max. air humidity residual moisture of the ground	18 °C 22 °C 40 - 65 % / < 80 % < 3 %
Curing time at 20°C: final hardness mechanical stability not sticky walking admissible	after 7 days after 7 days after 8 - 10 hours/ 16 hours after 16 - 24 hours/ 24 hours
Adhesion strength on concrete	> 2 N/mm² (fracture on concrete)
crack bridging according to DIN EN 1062-7 with approx. 1.5 mm thickness	test temperature: + 23 °C 1,0 mm
ultimate tensile strength according to DIN EN ISO 527 Tension Elogation	test temperature: + 23 °C 6.0 MPa 69,2 %
Cleaning	BARiT Cleaner*
Binding agent	2-K-PUR-resin